• 1 x RJ45 plug - 2 x RJ 45 sockets
• Usable as port doubler for CAT 5/ ISDN connections
• Ca. 15cm cable length

Wiring layout:

RJ45-Plug	RJ45- Socket1	RJ45-Socket2
1	1
2	2
3	3
4	6
5		1
6		2
7		3
8		6

A standard 10 base T cable has 8 contacts (wires). For data, you use only 4 of those 8 wires for a single connection. This device splits the wires into 2 lines, so you don't have to run a second cat5 cable. You will need a splitter on both ends of your cable run for this to work. You can't just attach it to 1 end and expect it to work. You will not have a connection unless the device is at both ends of the cable run.

NOTE: This will only work for CAT5 as CAT6 uses mores than 4 wires.